...intake manifold gasket, all installed within last 60 days & car still overheats. It will go from cold (ambient temp) to hot, then slide all the way back down to "normal" & then back ...
install: Fig. Lower intake manifold bolt torque sequence-3.8L (VIN K) engine Clean all parts well with degreaser, especially the gasket seal surfaces on the upper and lower manifold pieces and between
intake manifold. Also check the throttle body for mass air flow sensors location. On mass air flow sensors with a sense wire, this wire can become contaminated with dust particles. These particles can
...Install the EGR Valve with a new gasket to the intake manifold. NOTE: Refer to Fastener Notice in Service Precautions. 2. Install the bolts through the EGR valve. Tighten Tighten the bolts to 30 N.m ...
...intake. Install the solenoid valve mounting bracket and power steering support brace to the intake manifold. Connect the heater pipes to the intake and front cover. Attach the coolant bypass hose to ...
Usually answered in minutes!
757 Questions
631 Questions
489 Questions
420 Questions
426 Questions