Question about Lawn Mower With Toro Power Tools
I have a 20073A self propelled lawn mower that makes a grinding sound when I start out mowing or turn the mower around. I replaced the metal gears twice and that quiets it for awhile, but then the ...
Question about Co M/R Blwr/Trmmr Rear Bag Kit
the front wheel drive will not engage properly check the front wheel drive pinion. and the gears in the wheel. you may want to check the belt from your trany to the engine. some times thy Ride up the ...
Question about Lawn Mower With Toro Power Tools
...gear noise when I try to engage drive. I apologize for not mentioning that the mower has a PERSONAL PACE DRIVE sysetm and this may be where the trouble is. Adjusting the cable makes no difference. At ...
Question about Lawn Mower With Toro Power Tools
repaced transmision but right wheel doent pull toro 20016 when re assembling, look closly at the small pinion gear, there is a"R" on one side & "L" on the other' you may have to flip the gear over
Toro model 20017 PP drive problem My model 20017 is about 3 years old and from day 1, it has made noise. An authorized repair center only ''cleaned'' the gears, according to the service ticket, but ...
Question about Lawn Mower With Toro Power Tools
...a drive pinion that can be used on either side, however, internally, they ratchet one direction, drive the other direction. You may want to rotate (reverse) the installation of one gear and try
Question about Lawn Mower With Toro Power Tools
...will not go in reverse. Any ideas? thanks The pinion gear (the small one) can be installed both directions. Remove that gear and reverse it's direction, in other words, install the oposite end
Question about Lawn Mower With Toro Power Tools
I bought a self propelled Toro mower and it is hard to pull backwards. I removed the plastic toe guard and that did not help. I also have a White "brand" self propelled and it is easy to pull ...
Question about Lawn Mower With Toro Power Tools
...pinion gear connected to the belt end, and a larger bevel gear connected to the axle, all inside an aluminum shell, we could call it a basic transmission. On my Toro the bevel gear had flat ...
...gear, pin groove removal Toro 20017. Self propel does not work. Replaced belt, adjusted cable. No go. Took tranny apart to find worn gears. Ordered bevel, pinion, and bearing. How the heck do you ...
Usually answered in minutes!
370 Questions
122 Questions
62 Questions
64 Questions