Questions & Answers for: Ford Explorer install bypass pulley

...Install the heater and water bypass hoses to the water pump. Lift the accessory drive belt tensioner and install the belt. Securely tighten the water pump pulley attaching bolts. Install the engine ...

...pulley mechanism. Always release the spring pressure gradually. Rotate the belt tensioner to relieve tension on the belt?4.6L engine shown, others similar To install: Route the belt over the pulleys ...

do i need a bypass pulley to bypass the air condition pulley yes...just go to any auto parts store theyre only @ $20/30

...pulley. Install the drive belt on the power steering pump pulley. On the 2.3L I-4, Ranger 3.0L V-6, and 4.0L V-6 engines, position and rotate drive belt on engine. While lifting drive belt tensioner ...

...bypass my air compresser Yes you can, here's the diagram for a/c and without a/c, hope this was every helpful. Just disconnect the clutch,if the compressor is seized and the clutch pulley bearing ...

...pulley on tensioner. If for any reason, the tensioner is crooked, replace it!!! Also, install the belt with the writing facing you like you are trying to read a book. This WILL (a trick I learned at ...

...bypass hose and the lower radiator hose.4Loosen and remove the bolts attaching the water pump and remove the pump from the engine.5Clean all the mounting surfaces to the water pump.6Install the new ...

2003 explorer eddie bauer edition 4.6 a/c clutch. any way to bypass with a smaller belt? They make an AC idler pulley replacement, but you have to remover the compressor.

...edition. A/C compresser froze up . any way to bypass the ac with a smaller belt. They make an AC idler replacement pulley, but you have to remove the Compressor and put on the pulley, but it

...belt do I need to get to bypass the AC compressor? If it can be bypassed,any parts store will sell the bypass belt. If none have it, then it can't be bypassed. they do sell bypass pulley's for