...pulley. loosen the clamps and detach the hoses from the water pump. if stuck try to twist to break seal. check hoses if bad replace. on v6 & v8 remove the water pump coolant return tube mounting ...
...bad it is, theres a bypass bracket you can install you will new to remove compressor and install bracket with pulley to bypass,just same all parts you remove so youll have them when its time to
...bolt, if fitted. On engines except 4.7L, loosen the bypass hose clamp at the water pump. Remove the seven water pump mounting bolts and, on the 4.7L, one nut.To install: Reverse the removal
...bypass hose clamp at the water pump. Remove the seven water pump mounting bolts and, on the 4.7L, one nut. WARNING Bolts may be of different lengths. Be sure to note their locations. To install: ...
...pulley from vehicle. Remove lower radiator hose clamp and remove lower hose at water pump. Remove heater hose clamp and heater hose from heater hose coolant return tube. Coolant Return ...
Question about 2001 Durango
...bypass with belt without removing compressor? no because you will need to install a idler pulley off a non air engine to make things work or you may be able to buy a belt for a non air dakota that ...
Usually answered in minutes!
2,049 Questions
1,616 Questions
1,378 Questions
886 Questions
1,005 Questions