Questions & Answers for: Buick Century install bypass pulley

...It will show you the location of the tensioner pulley, which must be loosened in order to remove and install the new belt. When the new belt is on, just readjust the tension via the tensioner

...for you.A good power steering pulley puller/install tool can do this. This model has a very large pulley base that is part of the shaft of the water pump. Here's a photo that shows the bolt

...Install the water pump pulley and bolts and torque to 18 ft. lbs. (25 Nm). Install the remaining components in the reverse order of the removal process. When refilling the cooling system, use the ...

...pulley Remove the belt by applying pressure opposite the tension on the spring in the tensioner. Remove the bolt in the center of the tensioner pulley and remove it. Reverse procedure to

...bypass the compressor? What engine? They make a pulley adapter to install in the place of the a/c compressor for vehicles that the a/c con not be bypassed. You local auto parts store will have them. ...

...bypass the a/c. good-day ! NAPA Part# 25-060744, even spacing between Water Pump Pulley and Idler Pulley. I had to just keep trying belts till I found one. (Credit to the NAPA salesmen they let me ...

Replace Alternator - Belt Tension Pulley When re-tightening the Belt Tension Pulley after installing a new alternator on my 1999 Buick Century, can you tell me if the tension should automatically ...

...century custom is It causing the car to not start?? if it is there is a module that will help u bypass it.. I had to install one in my buick . had it for 5 years and havnet had an issue. Hope it ...

...pulley broke right off If you view the other tensioners you will see one that can be loosened, it will allow for some play. Install the replacement belt and reset the tensioner so that it is snug. ...