Questions & Answers for: inside sewing machine foot controller

...inside the machine itself. try taking the foot control apart (dis-connect from power first). you should see a component rectangular in shape connected to the wires in the foot control. dis-connect ...

021 (U.K.) XA6414-021 (Australia, New Zealand) The above accessories are stored in the accessory bag inside the extension table. These accessories have been designed to help complete most sewing tasks

...sewing machine. Check the power cord for cracks, burns, or faulty contacts as this could be a possible reason for the foot control not working. Open the foot control by using a knife or flat surface ...

...sewing machine goes by it self when I unplug the foot peddle it stops What make and model machine is this please? If its an Elna Air electronic with the pneumatic foot control then check that the air ...

...sewing the machine computer screen went black and shut off. I turned it off and back on again, and sewed for a few minutes until it cut off again. This repeated 3 times. Yesterday, I turned it on and ...

...sewing machine will sew for an inch and the stop when the foor control is pressed Foot controller (JF-1000) works some times, then not others, checked with multimeter, turned out that variable slide ...

sewing machine will no longer sew. It makes no sound at all when I use the foot pedal. It will not respond at all. Is it the foot pedal and does it have total control over the machine? Most handy guys

...sewing machines are controlled by a foot peddle the harder you press the faster it goes but if this one is electronic it should have another method of slowing it down Sounds like you need a new foot ...

inside the foot control/cable. Disconnect foot control and try using START/STOP and see if the resets stop. I noted the following in the manual; "Never operate the sewing machine with any air openings

...inside there and see what has come adrift. There should be screws under the base, sometimes they are hidden under the feet. Hopefully, just loose screws. Or you can Google make model replacement foot ...