Question about Drop-In Bobbin 505S-21BH Mechanical Sewing Machine
bobbin?.......Thanx hi! there wind thread on bobbins winder 4 times by your hand rotate clockwise,insert in shaft bobiins winder on top of your machine near hand wheel push latch to engage loop thread
insert the bobbin have you ran the thread through the tension srping in the bobbin case? You need to then hold the latch open on the bobbin case and insert the bobbin, letting go of the bobbin so that
...insert the bobbin case? It has how do I re-insert the bobbin case? It has fallen out of the machine. I assume this is a oscillating hook machine. I.e. the case snaps underneath the machine in front? ...
Question about 15516 Mechanical Sewing Machine
thread gets tangled in the lower bobbin area Make sure you insert the bobbin into the bobbin case correctly. In the bobbin case there's always something that you have to hook around.
...change the needle rethread the machine top thread make sure to get every thread guide take the bobbin out & make sure it's wound correctly & inserted correctly in the bobbin case or ...
bobbin Case, & make sure the bobbin is turned the correct way 4. make sure the thread has not come off the thread take up lever 5. Clean under the needle plate & in the bobbin area for lint or
...insert the bobbin in the case --when you insert the bobbin in if it doesn’t stitch correctly turn the bobbin over see if that helps or bobbin case is not inserted correctly 2. Lint has collected in ...
Question about 11101 Mechanical Sewing Machine
...bobbin case make sure the bobbin case is inserted correctly in to the machine if it's a front or side loading bobbin case make sure the top thread has not come off the top thread take up lever Needle ...
Question about 11101 Mechanical Sewing Machine
-make sure the bobbin is not warped or damaged try different thread-- use EVERY thread guide make sure the bobbin is wound correctly--inserted correctly in to the bobbin case--and turned the right way
Question about 11101 Mechanical Sewing Machine
...insert a brand new needle!
Bobbins do usually have a specific way of being loaded. Most machines require the bobbin to be inserted into the bobbin case so when you pull on the thread tail, ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions