Questions & Answers for: Ford E-150 input turbine speed sensor

Question about Ford E-150

1 Answer

cannot find the vehicle speed sensor on my 2003 e150 4.6 need a diagram its in the rear end on top of housing

Ad

Question about Ford E-150

4 Answers

...speed may be raised adjusting throttle screw. Try changing the throttle body position sensor, or the ideling screw. , Service the fuel injection system (injectors and filter) have the gas tank washed ...

Ad

...turbine speed sensor & abs sensor in diff, still has same problem Be sure to check the vss (vehicle speed sensor) at the output shaft as it's a major input for both engine and transmission. This ...

sir i m very sorry to disturb u but i m simply an engineering student of 7th semester n my project is on electronic governor so i just want to know how the electronic governor is efficient over the ...

Question about 2007 E-150 XLT Wagon

1 Answer

...speed sensor. It shows 518 ohms and will change when a piece of metal is brought near it(it is magnetic) and returns to the original reading while the metal is touching it. When the metal is removed ...

Question about 2007 E-150 XLT Wagon

1 Answer

Fan switch for heater doesn't work. Resister pack? if it doesn't work on low speeds but high speed works, it's the resistor. If no speeds work, suspect the blower motor. What make, mole & year? ...

Question about 2007 E-150 XLT Wagon

1 Answer

Where is an "02 sensor heater circuit bank 1 Where is an "02 sensor heater circuit bank 1 sensor 2" in the exhaust system of my 2001 Ford E-150 six cylinder van? the O2 bank 1 sensor 2 its ...

Question about 2007 E-150 XLT Wagon

1 Answer

1988 E150 with 280,000 miles lunges & bucks at 1988 E150 with 280,000 miles lunges & bucks at speeds under 45mph. When going up steep inclines sometimes almost stalls out, & feels like ...

Question about 2007 E-150 XLT Wagon

1 Answer

...be on the speed sensor or cable. It may just have reached it's break point and alternator replacement has nothing to do with it. Hope this helps and thank you for using FixYa! Have a good

p0462 Feul level sensor low input its a bad sending unit in the tank you need to drop the tank to change it 

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...