Questions & Answers for: Envision input signal range change settings

Input Not Supported" with black on the rest of the monitor. I have to reboot to get back to desktop. It will work again for a while before I get the message again. Tried the Dell with another Envision

Ad

input in it. When i first purchased it I had it connected via DVI and it displayed 1440 x 900 perfectly at color 32bit. But recently it has become out of range when on 32 bit and worked fine on 16bit.

Ad

Question about 19" Widescreen Flat Panel LCD Monitor

1 Answer

...signal input form you cable tv setup. Set the monitor up on a computer and see if it works properly. If it does then you may have a problem with the signal conversion of the cable tv to the monitor. ...

Question about 19" Widescreen Flat Panel LCD Monitor

2 Answers

range, it read , please change the display mode to 1440 + 900 with 60Hz. You need to Set the Desktop Display Settings to match those advised by the monitor... in other words, your desktop's resolution

Question about G19LWK Monitor

1 Answer

...range of supported signals. Go into your Video Adapter's settings, look at resolution then the refresh rate (Hertz), and compare to those supported by the monitor. When I had a similar problem, I ...

Question about G19LWK Monitor

1 Answer

...Range message. So something with the cable is case a problem with the signal to not to be sent properly. Note with monitors they have a safety feature that they would turn off if they got a signal ...

range 111khz/ 119khz please change the display mode to 1440 x 900 with 60 Hz." bouncing around a black background. The buttons on the side of the monitor dont seem to affect anything The PC is sending

Question about EN-7100e 17" Flat Panel LCD Monitor

1 Answer

...Input Not Supported". Does this have any thing to do with the resolution settings or refresh rate? Any assistance with this would be a great help. Tom S. Yes, you can try reducing the refresh rate to ...

Question about EN9410 19" Flat Panel LCD Monitor

1 Answer

Screen flashes on and off for a while and then finally works for a while. Usually if it has not been used for a while. Hi southernpg, I see that you mentioned you screen flashes ON and OFF then ...

Question about G22LWK 22" LCD Monitor

1 Answer

range. H. Frequency 68.7 KHZ V. Frequency 85.0 HZ your resolution is set too high.. change to VGA and move out from there. if the computer is set too high and you can not see boot into safe mode which

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Envision Computer and Internet Experts

Alexander

Level 2 Expert

171 Answers

Paul Bade

Level 3 Expert

1818 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you an Envision Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...