Input select to watch Cable tv Trying to watch tv, snowy screen, no picture. TV will not allow to select INput 1,2,or 3 to watch it. I've read the manual and it says to select Input select, however it
...Option, then select Input Select, then select the signal type you want to use on startup, set to Auto, then press menu to exit. let me know if this helps and please rate this solution. ...
Question about Aquos LC-32G4U 32 in. HD-Ready LCD Television
...detects signal on input 1, 2 or 3 it will make an input selectable. Supply signal first then select an INPUT. In other words, something has to be hooked up to those inputs before you can select
...select the input source. ( An image from the selected source automatically displays). Each time INPUT is pressed, the input source toggles. If the image does not come in clearly from the external ...
...the tv "set" to the right input. note where you have hooked up the cables in the back (inputs should be numbered) you must select the coresponding input number on the input selection on the
How do I get to the tv input source Select menu and choose the input you want or use the remote and push the input button to select whatever input you have connected to the TV.
Question about LC52LE810UN 52 in LCD TV
select different inputs. 2. If correct input is selected, ensure connector pins in cables are not bent. 3. If output is from a laptop, ensure Video output port is enabled (See laptop owners manual). 4
Question about LC52LE810UN 52 in LCD TV
...select any input regardless if it's active or not (meaning that even if you don't have a device plugged into that input it will still let you select it, where as other sets will only allow you to ...
Question about Aquos Lc32d62u 32-inch 1080p Lcd Hdtv
...select the input. (TV should be the top item in the list.) Next press the Menu button on the remote, above and to the right of the arrow keys. (There is no Menu button on the TV.) Use the left/right ...
Question about Aquos Lc32d62u 32-inch 1080p Lcd Hdtv
...guide appears, but why is there no picture? Input which you are giving is not proper or you are not selecting proper input source in LED Check in which input you had given , Select same input in ...
Usually answered in minutes!
878 Questions
339 Questions
295 Questions
241 Questions
228 Questions