Questions & Answers for: Onkyo input select

select CD or DAT as an input it gives the option of choosing the opt input. this is fine as i have one source on the opt 1. But these is no other option i can use to pick the second opt output on. any

...select dvd player on the onkyo, how do i assign the orange vidio input or inputs on the unit....... Not sure if I understand completely, but if you want to watch a source on DVD then then it needs to ...

select that input on the Onkyo. Why would it have an digital optical input if you can't select it? On many ht receivers you must enter setup mode and tell it which digital input you are using for each

Receiver will not recognize a 5.1 input Whether using a HD Dish receiver or DVD player, it only shows an analog input not digital 5.1. Have you selected the digital input through the audio setup? You ...

select cd input it operates normally. It was working ok. Any ideas? Make sure your DVD setting is looking at the right audio inputs. Usually there is a menu option or a button to toggle from analog or

When changing input, or making any changes it turns off. Do you mean with the remote or without? If only the former, I'd suspect the remote. If it happens with front-panel controls, too, what ...

...Also right now only those components connected through HDMI will go on the screen. The analog connections don't get through. go to menu and select manual input selection if it is on auto input ...

...Select INPUT OUTPUT ASSIGN Next make sure the HDMI monitor out is set to YES on the Receiver Monitor out HDMI Monitor - YES Next you need to assign the HDMI INPUT to DVD Select INPUT OUTPUT ASSIGN ...

I have no video or sound through the HDMI inputs Have you gone into the set up menu and selected HDMI and an input? Some systems require you to select the input methods.

...Select the AUX input: Rotate the input selector knob or press the corresponding input button to choose the AUX input. The label "AUX" should be indicated on the display or selector knob. Connect your ...