Questions & Answers for: Fender input jack

...on the power amp input jack is bad. You can try increasing the spring tension, but frankly these jack are poor quality You could run it that way with a short cable or open the unit to do the

to 1/4 TRS (stereo) cable from the PC into the Stereo 1/4 inch jacks right below the RCA stereo input jacks. TRS stands for tip-ring-sleeve which means the jacks have the extra "ring" over a mono jack

...input jack. A VERY common thing with these. They don't like to work on the jack because one has to remove too much to replace it. Lazy shop! Sometimes the solder has just broken loose or the board ...

I KNOW WHAT THE INPUT 1 AND 2 ARE USED FOR . BUT WHAT ARE PRE OUT AND POWER IN USED FOR. PLEASE HELP ME UNDERSTAND. THANKS DAVE If one choses to use an external amplifier one takes the pre out and ...

I get no sound at all when I plug in to the input and its not my lead or guitar, how can I fix the amp? This is probably not a DIY repair. You best take it to a repair shop. Likely the power amp has ...

...input jack on the instrument input hack on the amp.. They do come loose off the board.Either get a new input jack or resolder the old one. if you only have one guitar look at the guitar output jack. ...

input jack? The power amp input jack takes "line level" input BUT is monaural (single channel). The output of an ipod is Stereo. Hence you would have to "mix" the two channels before connecting to the

...INPUT jack (not the preamp output) is not making contact. These jacks are really poor and the problem is not that uncommon. Fix is to open the unit and increase the spring tension on the contact or ...

Fender telecaster keeps cutting out the input jack is either dirty=crackling sound in and out or broken or a wire has come off your input jack or is loose