Questions & Answers for: Toshiba input error

Question about e-Studio 350 Copier

2 Answers

error code c470 (c470) - IH initialization or IH power voltage abnormality: The AC input is not applied to the IH control circuit normally, or the input voltage is too high/low. You can try going into

Ad

Question about e-Studio163 Copier

1 Answer

C44

...is not 0 input 0 and press the interupt key if the machine goes into c44 error again check the thermo fuse foe a shor if it shows open circuit replace it with the thermistors and reset machine ...

Ad

Question about e-Studio120 Copier

1 Answer

...unit error very quickly in sequence do the following [clear]-[exposure]-[clear]-[exposure] machinewill go dead input 14 and press start mc will clear error if the unit is faulty you will have h4 ...

Question about e-Studio163 Copier

3 Answers

...error code on the E163 machine. If it is C44 please do the following. Switch off the machine. While holding down 0+8 buttons, switch on the machine. When ad shows on the display, input 400 then press ...

Question about e-Studio 232 Black and White Copier

2 Answers

...input 0 and press enter on the display. Switch off the machine wait 1 minute and switch the machine on. If the error reappears the thermistors and thermo need fuses need to be replaced. I hope that ...

Question about E-STUDIO 450 Copier

2 Answers

...error is Database Abnormality Please switch off the machine While holding down 0+8 buttons, switch the machine, when in test mode please input 684 and press the start button. that will rebuild the ...

Question about e-STUDIO 352 Black and White Copier

1 Answer

...error code E520 Paper does not reach ADU sensor input: Paper does not make you get ADU sensor input, review paper feeders feeding gums are in good condition p?apel or otherwise remplazalas, all ...

Question about COPIERS E-STUDIO 520 Copier

1 Answer

...error c472 [C471/472/473/474/475] indicates IH power voltage abnormality or IH initial abnormalityClear the status counter (08-400) to "0". If still occur again, u need to check followings:1. Check ...

error 0xCOO4E003 when l input windows 7 ultimate product key https://support.microsoft.com/en-gb/kb/931276 ..look at this page might help you out. Somebody who need windows key click: www.vanskeys.com

Question about COPIERS E-STUDIO 520 Copier

1 Answer

...error. I have had no luck with finding a remedy to this issue and was hoping someone here might have an answer? An IO device is an input/output device your disc drive is a input device so either the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment and Supply Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...