Questions & Answers for: Mitsubishi input comp

...comp input that is designed to output 1080i. However whenever you input a signal of any type you get a green picture. All other tubes are lit but they're all weak. I checked and found no bad ...

...COMP 1/2 inputs are NOT 1080 compatible, only the DTV input. As another poster said, you must use component video cables, not the old red/yellow/white cables. you can lose too much signal quality w/ ...

...input selction for any inputs including hdmi i can only switch between cable comp 1 comp 2 camcorder and satelite.....it has 2 hdmi inputs on the back as well as 4 diff inputs..but they dont register ...

input and activate (enter). Also, look into owners manual, the customer service at mit's will step you through it if you wish. Note: put cables into comp 1 (eg), make sure colored cables are correctly

...Comp 2, Input 1, Input 2, Ant-A, Ant-B, DTV) but the problem remains no matter what input is used and what source the picture is from (Antenna, DVD or Satellite). Sounds like the CRTs are going into ...

menu the DVD player does not exist. Am AI missing something? This can be solved in the setup, the dvde input needs to be enabled. It will be one of the comp inputs depending on which one you are using

...I just got this television, a mitsubishi wd 52525 from a friend. I hook up the PS2 to the three inputs in the front. Red, yellow and white cables. However, how do I play? The only inputs

...INPUT TO USE ON THE MENU. PLUGGED CABLES INTO COMP 1 AND COMP 2, CHOOSE SAME ON THE TV MENU, COMES UP SCRAMBLED. HELP! COMP 1 and 2 are for 480i/p sources. Hook it to the 1080i capable on the back. ...

...Comp-2, and HD-DVR in DTV all component inputs. All set on HD. But when you turn on the tv it shows as 480i. Can not find any menu pages that will allow me to change it to 1080i. Down side is my kids ...

...p) will be dictated by using a) a device that supports it, and b) using one of the "COMP" (or HDMI) inputs with all video and audio ports used. In general you just can't connect a tv signal to the tv ...