Questions & Answers for: Jensen inline fuses

...fine but the red light stays on and nothing happens. I pulled out the head unit to check the inline fuse, pulled the fuse, it was not blown, waited a few minutes and put the fuse back in. As i ...

...Then I can drive away. Basically, ground the wire that is used for DVD activation, and put a switch inline on it. Then you can break and reapply the ground in whatever manner is required by the ...

...Then I can drive away. Basically, ground the wire that is used for DVD activation, and put a switch inline on it. Then you can break and reapply the ground in whatever manner is required by the ...

...Then I can drive away. Basically, ground the wire that is used for DVD activation, and put a switch inline on it. Then you can break and reapply the ground in the manner of the e-brake cycle I ...

...Then I can drive away. Basically, ground the wire that is used for DVD activation, and put a switch inline on it. Then you can break and reapply the ground in the manner of the e-brake cycle I ...

...a humming noise soon after we bought the car. I found the ground wire disconnected, the 20amp inline power fuse blown as well. I am in the process of getting another fuse and reconnecting the ...

...for good contact) 5. make sure the speakers are connected to the radio. if all is ok then check the inline fuse from the hot wire from the battery is not blown and the fuse on the amp is not blown.if ...

...can I verify this, and can I get a replacement controller unit? if i remember correctly there is an inline fuse for that unit (more than likely tucked behind the radio) check that first. if its not ...

...fuses on the amp and use a inline fuse that is the next fuse size sum... Ex. 2 40 watt fuses on the amp then 40+40=80 watts so you would want to get a 100 watt fuse. Also remember you can never go to ...

...and switched for main feed (switched feed will need to be on for radio to work). At the least put inline fuse in the main feed (suggest