Question about CLP 300 Laser Printer
...ink smudge on the left margin of the page. I checked about cleaning toner spills inside the printer, ollowing the manual instructions. Everything looks very clean, as the printer has been in use only ...
Question about IntelliFAX 2800 Laser Fax
...Smudge of ink along top edge paper Brother Intelifax 2800 I changed the ink cartridge and now I get a black smudge of ink along the top of the paper using our Brother intelifax 2800. I tried a new ...
Question about Stylus CX5000 InkJet Photo Printer
...several times and it's making the smudging worse. This may be the cartridge itself, take the black ink cartridge out and check the head on it (the part that points in to the printer, usually down) ...
Question about Color LaserJet 2600n Printer
...Smudge #4 - 3" down from #3 and 1" up from b/o RM and page. Smudges look to be generated by round object, given their 3" equal distant increments. If so, ink/debis is on a wheel, gear, or cylinder ...
ink remains wet and if touched smudges. after printing the copy's ink stay wet and does not dry, if touched ink smudges. savin 2527model Sounds like the fuser is bad...try installing a new fuser.
Question about AR-5320 Black and White Copier
Smudges on paper and then when it does copy, ink is light. Sharp SD-3062. 2 problems. 1) ink is light on paper. 2) it seems like until the copier warms up for a while, the copys have smudges all over ...
...the ink smudges - ink does not smudge just heavy on certain spots Sounds like you need to replace either the fuser or the rollers the rollers could have ink build on them and it would smudge the
...wedding invitations on my Canon MP460. I'm using a cardstock thickness of paper and have set the ink levels for "Other Photo Paper" on my Mac. The paper has been going through perfectly, ...
...that melts the dry toner-ink onto the paper. If the fuser is not getting hot enough, or is not working at all, then the toner-ink will smudge. Take the printer to a qualified technician for
Smudge and missing ink Hi My printing is smudging on the left side and there are two columns of missing ink (creating gaps in the printout). remove all image units. clean the class where the laser ...
Usually answered in minutes!
2,817 Questions
2,279 Questions
2,166 Questions
2,151 Questions
1,916 Questions