Questions & Answers for: indesit washing machine door lock

INDESIT 1000 DOES NOT START LOAD WASHER DOOR LIGHT FLASHES BUT WHEN PRESS START - IT DOESN'T!! DOOR LIGHT JUST KEEPS FLASHING Had a similar problem ,flashing red led means door not locked, I removed ...

...Machine not draining My Indesit WIA 121 is failing to drain it was happily running until I heard a strange sound at which point it stopped working. I turned it off and then back on and now the door ...

...Indesit Washing Machine Many of our newer Indesit Washing Machines have a series of indicator lights, which flash to indicate a possible fault on your installation or simply to let you know a ...

...machine has drained. The door wont open and the orange door lock light keeps flashing along with the rapid wash green light. Any ideas? I indesit wib111 Un plug machine from wall to see if it re

...Indesit Washing Machine WIL 123s does not start. The door lock and one other light are constantly flashing at me. Is this a problem that can be fixed by replacing the controller board? I have taken ...

Indesit IWD7145K Washing Machine Error code F06 flashing on digital display + all program indicator lights. What does this mean. There is no such error code in the troubleshooting section of the manua

Indesit IWDE126 door lock red light flashing/beeping appliance turns on, once wash has been selected the red door lock light flashes and beeps every couple of seconds. Obviously an issue with the door

...Indesit were flashing now only the time delay and the tshirt with dirt on it button next it are both flashing plus the door lock light which is flashing and door wont lock. Please help try you tubing ...

...Indesit washing machine but none operational Indesit IWC 91842 Green light flashes on start/pause button and door locks turning light red but unable to select any operating cycles. Once door locks it ...

...Indesit Innex washing machine near the end of its cycle is causing the lights to flash and the machine to stop. The main light flashing is the lock door button. To resolve this issue, try the ...