Questions & Answers for: incline motor Cars & Trucks

Question about 2001 L-Series

1 Answer

...the plastic housing off the motor and gave it a few sharp taps and it allowed just enough juice to incline my seat back. He said if I didnt use it anymore, then I wouldnt need to replace the

Ad

...incline back up. No motor sounds when trying to incline. Everything else works. Forward, back, up, and down AND recline but does not incline..... Took it to 2 local shops and they think it is the ...

Ad

Question about 1991 Town Car

1 Answer

...are drive you need to check your points where your motor is mounted to the chassi. if the motor is inclined, the gearbox also can be inclined, and will not give enough space to shift from one gear

...motor when starting up an incline after driving for a while car acts like it is skipping when coming to a hill- if let off gas and push again it clears up while going up hill- only does it when going ...

...motor installed. Works now on flat surfaces, but not any incline. Anyone else have this issue? needs dealer to sort it as its happening here in Australia(Kluger here) but not sure why and not common ...

...be the clips on the window itself the motor assembly is about 150.00 if u are nit mechanically inclined or dont have the right tools take it to a body shop their rates are cheaper than a

motor 4x4,automatic transmission sticks in park when on an incline,and is tough to shift back to park from reverse even on flat terrain,I have to rock the blazer to get it to shift out of park when on

Question about 1996 Blazer

1 Answer

...incline) motor wiring is damaged or has intermittent connection. 4. Home switch is bad. 5. Gear (elevation/incline) motor is bad. 6. Gear (elevation/incline) motor target is damaged. 7. Lower PCA is ...

Why does my 1995 nissan pick up lose power and speed on uphill inclines? If you keep the RPMS (tach) up to 3000 and above (DONT REDLINE YOU'LL BLOW YER MOTOR UP!) At 3000 RPM to 3500 -4000 RPM is ...

incline motor but doesn't line up properly, and old one now won't line up I confirmed the correct part for my machine. But since taking out old incline motor it tried to recalibrate I think and now we

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...