Questions & Answers for: Konica Minolta image transfer

...image transfer pressure/retraction failure Relevant Electrical Parts Retraction Position Sensor /2nd Image Transfer (PC5) Pressure/Retraction Solenoid /2nd Image Transfer (SL4) open cover, remove ...

...Image Transfer ATVC failure An abnormal average value is detected during an adjustment of the second image transfer ATVC value. Reset your Toners and Imaging units for Minolta Bizhub and CF ...

image transfer roller unit on bizhub 350? Periodical replacement for IMAGE TRANSFER UNIT is 150,000-print 1. Open the Right Door. 2. Pull down the blue knobs [1&2 ] forward and remove the Transfer

...Image Transfer Retraction Position Sensoris not activated (retracted position) within 5sec. after the 1st Image Transfer Pressure/Retraction Motor has started turning during asequence of the Transfer ...

...image transfer ATVC black failure P - 27 2nd image transfer ATVC failure P - 29 1 st image transfer ATVC colour failure Check the transfer belt unit contact and that of high voltage board for ...

image transfer belt unit. P -21 : Color shift test pattern failure. Wipe clean the surface of the transfer belt with a soft cloth or change the image transfer belt unit if the transfer belt is damaged

...image Verify the problem is in the imaging units or the transfer belt units.Remove the transfer unit and clean on vacuum cleaner the transfer belt cleaning blade.If you see the stripes on transfer ...

...Image Transfer Pressure/Retraction Position Sensor doesn't turn ON (Retracting) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON ...

...image transfer pressure retraction motor has started rotating during the 2nd image transfer roller is retracting. • The pressure welding alienation sensor doesn't turn ON (pressuring) even after the ...