...with my iMac.....which interface works the best on iMac so I can use my guitar rig both stand alone or as a VST instrument?.......somebody there with some good suggestions?........thank you in ...
imac-samson-gtrack mic compatability can the g-track be used with an i-mac?. From the Samson Audio website... "Ideal for the traveling musician or the project studio, the G-Track ships with a desktop ...
iMac so I can change the hard drive place the screen face down on a cloth Go to where the speaker is located and you will see 3 ot 4 screws depending on the model remove those screws and lift the case
iMac G5". No luck for me though. If you have the early G5 that I have, pull power plug and any cables, place face on non-scratching surface, rotate 1/2(?) turn the 3 screws on the bottom, lift off the
can i detach or separate the stand of apple imac from the monitor? if yes how can i do it? thanks Well you can but you're not supposed to.
Question about 27" iMac 2.8GHz Quad-Core Intel Core i5, 8GB RAM, 1TB Hard Drive, ATI Radeon HD 5750, SuperDri... (Z0JPI584X215750) Mac Desktop
...it's not at all obvious how to do it! Check the linked YouTube video ... starting at 12 minutes in. (Start in at 9 minutes to see how to do it wrong - LOL!) Monitors In Motion Stand for the iMac ...
Question about 27" iMac 2.8GHz Quad-Core Intel Core i5, 8GB RAM, 1TB Hard Drive, ATI Radeon HD 5750, SuperDri... (Z0JPI584X215750) Mac Desktop
Imac Stand does not come off You could have a look at http://www.youtube.com/watch?v=FdjphGvqhko it is in german but the video has the full steps on how to take it off. Hope this helps.
Question about 21.5" iMac Intel Core i3 3.2GHz, 4GB RAM, 1TB Hard Drive, ATI Radeon HD 5670, SuperDrive, Apple Keyb... (Z0JM56704GB1TNUM) Mac Desktop
remove imac stand
Question about 21.5" iMac Intel Core i3 3.2GHz, 4GB RAM, 1TB Hard Drive, ATI Radeon HD 5670, SuperDrive, Apple Keyb... (Z0JM56704GB1TNUM) Mac Desktop
stand from a Apple imac How do you remove the stand from a Apple mac 27 inch It can get tricky. If you post the year your Mac was made, I can follow up with some instructions. Check out iFixit as well
Question about MD096LL/A 3.2GHz 27" iMac Desktop 2012
Motion Stand for the iMac Part Yes it can be remove if the model of your iMac is mid 2012 or earlier if I 'm not mistaken. The newer iMacs have to be ordered with the Vesa mount already built in to it
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions