Questions & Answers for: ignition switch


Question about 1991 Spirit

1 Answer

...Ignition Switch itself (THE ELECTRICAL SWITCH) I think that is where you should Look. On these models, the ignition lock and ignition switch are removed as an assembly. Refer to IGNITION LOCK . ...


Question about 1996 Windstar

2 Answers

...ignition switch is the electrical part behind the lock cylinder where the key goes in. Ignition Switch Lock Cylinder Lock Cylinder Functional Removal The following procedure applies to vehicles that ...


Question about 1992 Sable

1 Answer

ignition switch in the car rotates all the way around but it has always done that it just recently started not working to turn the car off.the key will turn but the car will still be on. what could be

...ignition switch, not the ignition lock cylinder. they are 2 different things. Section 11-05: Steering Column Switches 1996 Taurus, Sable Workshop Manual REMOVAL AND INSTALLATION Ignition Switch ...

Question about 1996 Taurus

2 Answers

...ignition switch has the detents and spring inside of it. The lock cylinder where the key goes in, just allows you to turn the cylinder which then turns the ingnition switch. The ign switch has the ...

Question about 1995 Sidekick

1 Answer

...ignition switch on 1993 suzuki sidekick i need wire colors Here are the ignition switch wire and colors. Constant 12V+ White/Green Ignition Switch Harness Starter Black/Red Ignition Switch Harness ...

...ignition switch diagram pdf im wiring up switch got 6 wires  PART  COLOR LOCATION 12 VOLT CONSTANT  WHITE/BLACK (+) and WHITE (+)   IGNITION SWITCH HARNESS ...

Question about 2002 Spectra

3 Answers

...ignition switch It depends on vehicle to vehicle.But its not very diffult on mot of cars to replace ignition switch.Basic theory of replacing ignition switch is same for all car models.:----- To ...

Question about 1993 Es 300

1 Answer

...ignition switch replace To troubleshoot these issue, for ignition switch replacing procedure:--- Click the link below:--- IGNITION SWITCH REPLACING It depends on vehicle to vehicle. But it's not very ...

ignition switch in a 2005 chevy malibu IGNITION SWITCH REPLACEMENT REMOVAL PROCEDURE 1.Remove the instrument panel (IP) cluster. 2.Remove the knee bolster. 3.Remove the I/P center trim panel. 4.Remove

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

john h

Level 3 Expert

23950 Answers

Brad Brown

Level 3 Expert

18666 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6656 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides