Questions & Answers for: ignition pack Cooktops

...if the knobs were pressed down (which they aren't). Suggestions? Either one of the ignition switches are stuck down internally or the ignition pack is faulty, no other possible cause. Regards ...

burner will not stay lit Cleaned it. Burner ignites OK but will not stay lit when knob is released. Presuming the flame is touching the thermocouple, try putting slightly more pressure on the knob and

1996 crown victoria has no ignition spark an wont start Miele use pressure switches to activate the igniter pack if none of them work the fault is the igniter pack itself.

removing spark module viking gas cooktop some burners not sparking Usually any control knob will activate all four igniters it's usually a faulty pressure switch rather than the igniter pack module.

replace spark module on viking gas cooktop replace park module Lift off the burners and remove the top, you will find the igniter pack in there be sure to turn off the power first.

I have a Viking VGSU161-6BSS stove top the ignitors stop working and now smoke was comiong out from where nobs are The igniter pack has fried itself and needs replacing, it may have also burnt wires.

The igniter does not work on my SMEG gas stove Hi it is probably the igniter pack under the controls depending on the model it could be a fairly large single pack with a pressure switch wired from ...

replacing stove top ignitor I think I may need to replace an ignitor on one of my burners on a DCS RGS 305ss. I have the new ignitor which comes with a spring and circlip. Do I need to remove the ...