Questions & Answers for: Chevrolet Malibu ignition lock

Question about 2005 Malibu

1 Answer

...I do? This is the problem with the key hole there must some object is stuck or it may activated the anti theft system you need to replace the whole unit ignition lock and the

Ad

Question about 1998 Malibu

1 Answer

...move...is that an anti theft issue or something else? thats something else, might be the ignition lock cylinder is bad, but if the switch turn and won't release park position, then it might be a ...

Ad

...lock and 1 unlock.) B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Do NOT Start) then back to OFF. D. Turn the ignition to ON (Do NOT Start) then back to OFF. E. Remove the ...

ignition lock cylinder. Press and hold the DOOR unlock switch. While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF. Release the DOOR unlock switch. The doors

ignition switch Release door lock switch. A chime will sound three times indicating remote programming active Press and HOLD the LOCK and UNLOCK buttons on each remote for 5 seconds A chime will sound

...ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder) 6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition ...

...wheel to free the key lock. There is a remote possibilty that the ignition switch broke, and the only solution would be to take it apart and fix it or replace it, a job best performed at the

...ignition lock will not turn in my 97 malibu. please help The tension on the steering wheel lock could be restricting the ignition cylinder. The steering wheel can turn about two inches in the locked ...

Question about 2006 Malibu

1 Answer

...ignition lock cylinder tumblers get in a bind all the time on GM vehicles.  It probably has little to do with inseting the wrong key.  Try inserting the correct key and "jiggle" the key in ...

ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.) 6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...