Questions & Answers for: Toyota 4Runner ignition key stuck

...ignition key/tumbler but new key still gets stuck most of the time. It was recommend to me to replace the ignition starter switch? How do I replace this? Thank you! Just a thought , if the gear stick ...

...ignition switch is giving me trouble. Sometimes I have to giggle the steering wheel while trying the switch to get it to start. Unlike other posts, mine doesn't get stuck in the "acc" position. I've ...

...ignition key lock set. My husband went to our mechanic and they used WD-40. It worked!!! JUST FIXED MINE WITH SAME PROBLEM, ON THE BOTTOM OF THE IGNITION SWITCH IS A SMALL SQUARE SOLENOID HELD IN ...

...ignition My key gets stuck when turning off engine. There is no ''stickiness'' when starting or when shutting off, but key gets stuck at ACC position and won't make it into Lock. I have tried two ...

...key in the ignition, it will not turn past the ACC notch - or maybe to the ON position. I've moved the steering wheel around (to unlock it) - nothing seems to be working. EVerything turns on in the ...

...ignition has been having problems with the lock position located on top of the steering column. when i try to turn my key and the wheel is locked, it jerks toward the direction I push the key. Please ...

ignition key of my toyota 4 runner 1996, gets stuck in the ignition, and when I disconnect the battery I am able to remove it with no problem at all You have a faulty "ignition key interlock" solenoid

...Key gets stuck in the ignition. I replaced the ignition locking cyilinoid and it still gets stuck every once in a while. After some research I am assuming that it might be a sensor in the shifter ...

...ignition switch stuck in lock, cannot get in acc. to remove and replace. have tried normal repair procedures with no success. Make sure that you steering wheel is not putting too much pressure on the ...

...ignition lock/key cylinder in the column. It's going to be quite difficult due to the fact there is a rod stopping the cylinder from coming out unless it is pushed and has to be pushed when ...