Questions & Answers for: ignition coil specs

...ignition. The common problem is a weak igniter. You need to do a current measurement to make sure the igniter is within tolerance. If it is within specs, then I would agree with docjohn174 about ...

...ignition coil on this vehicle in order to condem the igniter or the coil itself. Anyone who has these specs handy would be greatly appreciated. the specs are pretty easy to find (I don't happen to ...

poor spark,what should the ohms reading be for the ignition pulse generator,exciter coil and ignition coil resistance be for a1988 xr 600. XL 185S HONDA 79 MODEL EXCITER COILS OHMS SPECS ?

...spare engine control unit, Voltages and ohms within specs right up to and through the igniter.Coil is also within specs. What else could cause the loss of secondary ignition fire? check your

...body. replaced ignition module. almost started while cranking once. Am thinking now the pick up coil is defective. Need specs for PU coil resistance. Need specs for fuel pressure. google what you ...

Ignition Coil "D" circuitP0356 = Ignition Coil "F" circuitInspect spark plugs first.Then, measure/test your HT leads to ensure they are within spec.If the above proves ok, then suspect a bad coil pack

...Ignition Coil "D" circuit P0356 = Ignition Coil "F" circuit Inspect spark plugs first. Then, measure/test your HT leads to ensure they are within spec. If the above proves ok, then suspect a bad coil ...

Fuel pressure within spec. Vacuum within spec. Try a new coil. Red spark is not good, you need a blue snapping spark. If not the coil, better have the ignition analyzed. Possibly a bad ignition module

...idling after 10 minutes. Ignition coils resistance to spec. Pick up coil resistance to spec. Carb float height to spec. If you're the guy with all the ER5 questions you need trained help and a

...110 chain saw ignition coil. I have no spark, points are good and gapped and so is the air gap for the coil. Need resistance values for the ignition coil. Contact McCulloch directly with your