Questions & Answers for: Dodge igniter no spark

engine turns over butdoes not fire check step by step to find the problem. You mean the spark plug has no spark, ok, remove the spark plug no.1 into a cable and try to spark between spark plug and the

were are the spark plugs on a 2000 dodge intrepid r/t 3.5 Ignition CoilRemoval & InstallationTo Remove: Before servicing the vehicle, refer to the precautions at the beginning of this section. ...

How do you replace the spark plugs on a 1998 2.7 Intrepid? Hi, REMOVAL Always remove the ignition coil assembly by grasping at the spark plug boot, turning the assembly 1/2 turn and pulling straight ...

my engine wont turn over. mechanic said I am not getting a sprk could be a bad crank sensor. it tells the ecu when to spark. if the crank sensor is bad, the computer will not ground the ignition coil.

Enging code came up on my 2004 dodge ram 1500 5.7 Hemi. Said ignition coil E was bad and that I had a misfire in cylinder 3. Replaced coil at cylinder 3 but it's still running rough. Is coil E ...

no spark,no power to ignition module,already replace cam and crank sensor but still no power to ignition module,and no spark Have you pulled codes to see if anything comes up? check to see if you have

what controls the fire to the coil The ignition system is controlled by the Powertrain Control Module (PCM) on all engines. Here is a generic breakdown of most ignition systems incorporated after 1996

trying to figure out what the name of a part is it has a plug wire coming from it to the distributor That would be the ignition coil, the part that creates spark  at the spark plug.  If you ...

Why am I not getting spark on my 96 dodge ram 1500 5.2 1996 Dodge Ram 1500 4x4 sport 5.2. Crank no start. Not getting spark. I've put in new spark plugs and wires, new crank position sensor, new ...

My 2000, dodge durango, will turn over but will not start. I do not think i am getting spark . Please help It sounds like you may be experiencing an issue with your ignition system. Here are a few ...