Questions & Answers for: Ford E-150 idling fast

Question about Ford E-150

4 Answers

1993 Ford Van Econoline 150 w/5.8 engine. When slowing down, turning on A/C, or turning, van idles badly and sometimes quit, when cool runs perfectly, 1/2 hr driving it idles badly. To try to solve ...

Ad

...fast idling. if i drive the van, it just keeps getting faster. the engine does not adjust back to a normal idle. i hate to drive it, its ******* the transmission and brakes. It sounds like an ...

Ad

1994 ford e-150 idles too high. smells like gas too. 125k, otherwise clean & strong, 5.8, v-8. first thing i would do is clean out the throttle body a lot of time carbon build up can cause the ...

engine light on --burning to much -gas --idle to low--lack of power --hesitation i would recommend the following !.)check/change spark plugs 2.)change oil and filter 3.)change fuel filter ...

My 1994 E150 van with the 5.0 idles ''up'' and ''down'' in ''Park'' When I start my van it runs smooth for a few seconds and then idles ''up'' and ''down'' until I put it in gear. The overdrive light ...

my 1989 ford Econoline 150 van with a 302 engine idles to fast and moves down the road at 30 mph with out my foot on the accelerator. what should i do? TPS switch on throttle body

Question about 2003 E150

2 Answers

1989 Ford F150 with moderate performance cam and headers runs rough, smells rich, idles down then up. sometimes stalls, tried different MAP sensor, signal line on both sensors shows same all the time,

Question about 2003 E150

1 Answer

diagnose 1988 ford e150 fault codes 12, 21, 34, 44, 13, Engine overheating, throttle high on idle, and while driving Based on the codes you gave the high idle is because of the EGR valve. (12,13 and ...

How to get to air fuel mixture screws for adjustment with carb on engine, no room to get flex screw driver to the screws ! This is on a 1984 Ford E-150 van with a 302. Do you have a Holly on that ? if

1988 ford e 150 idle air control wiring too low power to idle air control valve If U have 12v coming to it U need to follow the wire to its source and look for resistance clean or replace it depends ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...