Questions & Answers for: Harley Davidson FXDL Dyna Low Rider idle rpm

Ignition seems to stop firing the spark plugs at low speeds or with slight throttle pressure. My Engine is a twin cam 88, 1450cc, carburated, with a map sensor installed in the intake. Seems like ...

i have a bad vibration on my 94 fxdlonly6 when i am slowing down or at a certain rpm but it is totally fine at a steadypace or when accelerating Ok, the Dyna series bikes have rubber mounted engines ...

what should 2007 dyna low rider idle at Typically around 700-900 RPM.

...near front of bike. As stated in another post. The bike NEEDS to idle at 1000 - 1200 rpm for proper oil flow.Anything less and you could starve the bike of proper oil circulation and damage the

idle between 1000 - 1200 rpm to maintain proper oil circulation. If you turn the idle down to get that lope or potatoe sound from the bike you can starve the engine of oil and burn it up. These aren't

idle of 950-1000 RPM then back out air/fuel mixture screw 1/4 turn, snap throttle to confirm responce, you may continue to back out air/fuel mixture screw untill desired throttle responce is achieved,

carb popping 5k on engine pops thru carb even when warm. Hi Anonymous, popping, coughing, spitting, or backfiring through the carburator or induction module can be caused by air getting sucked in ...

idle of 950-1000 RPM then back out air/fuel mixture screw 1/4 turn, snap throttle to confirm responce, you may continue to back out air/fuel mixture screw untill desired throttle responce is achieved,

...idle rpm down on my 2002 cam 88 Ensure that the engine is warmed up to normal operating temperature and the enrichener knob is pushed all the way in BEFORE adjusting engine idle speed. It is possible ...

...with the enrichener off to set the idle between 950-1050 rpm. Turn the screw clockwise to increases idle speed and counterclockwise to decrease idle speed. EFI idle speed is computer