Questions & Answers for: Mazda idle relearn

Question about 1993 MX-3

1 Answer

...idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 ...

Ad

Question about 2003 Mazda6

1 Answer

...idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 ...

Ad

Question about 1999 626

1 Answer

...idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 ...

and go etc., after a few days the problem will go away as the system will relearn to the clean intake. Have your idle air control solenoid checked.This controls the idle at the proper computer outputs

...relearn to the clean intake. EGR valve and dpfe sensor. More than likely its the sensor but I would replace both. Both control idle. Low / uneven idle problem can cause by a lot of components. Dirty ...

Question about 1999 626

1 Answer

Idle Air Control motor and it's internal housing with carb cleaner. You will need to remove the IAC to do this. It is located on the throttle body and usually has four wires going to it. Be gentle

Question about 1999 626

1 Answer

idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5

...idle after changing battery Once the computer memory is lost, it can take a while for it to relearn everything. You may have to have someone with a scanner go into the computer and do a relearn ...

Question about 2005 6

1 Answer

...lose the memory it has (which was backed up by the battery) for engine operating conditions like idle and transmission shift speeds and possibly other patterns like typical driver patterns for ...

...off the battery and put both CABLES together for 30 seconds then re hook both cables properly back to the battery, start car and let it relearn idle for about 15 mins. what exactly is the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 6
2004 Mazda 6

738 Questions

2000 Mazda MPV
2000 Mazda MPV

692 Questions

1999 Mazda 626
1999 Mazda 626

544 Questions

2001 Mazda Tribute
2001 Mazda Tribute

609 Questions

2002 Mazda Tribute
2002 Mazda Tribute

615 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...