Question about Essentio Desktop with Intel Core 2 Quad Processor
need diagram of back of computer-where does printer plug in? Hi, I don't see a model no on your post but I have been checking out most of the Essentio boards. They all seem to NOT have parallel ...
Question about Essentio Desktop with Intel Core 2 Quad Processor
...and load the DVD player? I see no manual loading... thanks it will either have a spot on the right side top of the door to pull down or a flush push button to open the door for youe dvd player. ...
Question about Essentio Desktop with Intel Core 2 Quad Processor
IDE; just plug each drive into a separate SATA port. Installation is pretty simple and straightforward, and you can use the existing drives as guides. If it stops booting after installation, check the
Question about Essentio Desktop / AMD Athlon II X2 Processor / 4GB Memory (CM163005)
My Cannon printer suggest useing another usb port to print faster. When I tried to use one of the USB 2.0 ports, the Cannon power cord would not fit. My computer is an ASUS Essentio Desktop PC CM5570.
Question about Essentio Desktop / AMD Athlon II X2 Processor / 4GB Memory (CM163006)
...IDE port on this that you can run 2 IDE devices off of. Note the main reason for this IDE port is not all ROM drives are SATA yet but you can run hard drives off this port as well. Let me know if you ...
Question about Essentio Desktop with Intel Pentium Dual-Core Processor E2200
speakers are hooked up but no sound sony speakers ( srsd4) are connected to a sony relay box and that is connected to the green port in the back of the asus tower. the sound on the monitor is on but ...
remove the flap I want to remove the flap in front of the USB port how would I do that IT'S THERE TO PROTECT FROM DUST.
...the way it hits the power button so how do I remove it? Try the following link. http://www.bhphotovideo.com/lit_files/69504.pdf Assuming there is nothing in the user manual to assist and that it is
Question about Essentio Desktop with Intel Core 2 Quad Processor
...ports are for sound.. pink for mic, green for main speakers, black for rear surround, gray for side surround, orange for center surround, and blue for line in....may also have an esata port (not ...
Usually answered in minutes!
7 Questions