Questions & Answers for: Asrock ide port

...not have a SATA configuration on bios setup My motherboard have sata connectors but only shows the IDE ports on the IDE configurations on the bios setup, so i am not able to set up my sata hard

...ASRock motherboard is recognising the hard drive, cdrom, ram, floppy but has the cd rom as the main ide drive. It will load to a point but hangs on the xp screen, i have changed the cmos battery with ...

...IDE CD I can't with a Sata CD. Is this normal ? I've checked on both sata port 1&2. Thanks Hi, Have you set the jumpers on the SATA drive to PRIMARY DRIVE?(first drive) Google a picture if you are ...

...port. At present the ribbon is connected from the blue port to the HD then on to the existing DVD. Derek No u cant use that port....if u want to connect then u have to buy a PCI to IDE

SATA drive not detected I have a P4V88 MB and I am trying to switch my primary drive from an IDE (Maxtor 120 GB) to a single SATA (WDC Green 500 GB). I have jumped the drive so it runs 150 instead of ...

ide port not picking up i have tried everything and nothing work can't find the hard disc and the dvd burner and its a dell board are you using IDE or sata configuration, tell me..

...IDE port. Provided is a link to you're motherboard; http://www.asrock.com/mb/overview.asp?Model=P4i45GV%20R5.0 Next, is a link for the SATA convertor; ...

...Your motherboard probably has 2 parallel-IDE connectors, but it may have 4 (two slower ATA33 ports, and two faster ATA66/ATA100 ports). Each ...

IDE (PATA), and SATA harddrives. Handles USB ports, Ethernet port/s, audio, and the CMOS memory. F) The Internal Bus is the 'Information Highway' between the Northbridge chip, and the Southbridge chip

...IDE ports (each port will take 2 devices) that the jumpers on the drives are correctly set to "Master", "Slave" or "Cable Select" as necessary, to ensure that both are recognised Hope this ...