Questions & Answers for: Samsung ics

link for IC's instructions It would be great to get that link. Thanks Heres the link for the ICs and they will send the instructions instantly by email when you place the IC order so you can get ...

...PICTURE MESSED UP AND CAN NOT CONVERGE THE PICTURE. COULD THE IC,S SHORTED? did you replace both ICs? also samsungs will usually burn at least two of the 3.9 ohm resistors when a ic

Samsung TXM3297hf No vertical Deflection Look for a small flat Ic attached to a heatsink with about 11 pins. That should be the vertical IC. Resolder the pins first. If that fails to resolve the ...

my samsung tv startup with full volume when i turn on my tv it start up with full volume. no other problems Its memory IC is gone needs to replace check model spec or IC log book for yours model or ...

replacing the ic's on a samsung hcm5525w. ic's are stuck in refrence to the stuck ic's. i desoldered all the pins from the ic's and removed the screws. made sure all the pins were desoldered by ...

...like 3d and has a bow tie effect. my picture perfect doesnt correct. how do you fix it Bad STK ICs replace both ICs will have part number on them STK392-110s if this is what you have upgrade to ...

My samsung rear projection tv has a problem with its convergence ic. i think theres two ics , but how do i tell which ic need replacing?? Always replace both once your going to the trouble each IC is ...

menu and dial buttons do not work all else ok Hi, When buttons on a cell phone does not work , it is usually a problem from the Board of the cell phone. An IC problem... IC are small chips that has ...

the battery is fully charged but the phone does not turn on If the mobile phone does not switch on, it is called a dead mobile. It can be due to many reasons 1. Water damage 2. Fall down 3. Not used ...

samsung c140 dead PHONE IS DEAD WON'T COME ON If the mobile phone does not switch on, it is called a dead mobile. It can be due to many reasons 1. Water damage 2. Fall down 3. Not used for a long ...