Questions & Answers for: icemaker arm

...arm on the icemaker to shut it off and leave it for about an hour. Come back in and turn the icemake back on by lowering the arm. If the icemaker does not begin a new cycle and the arm start rising ...

...arm up, and the icemaker is turned off to keep from making excess ice. When I had the overflowing ice, I checked my icemaker and found that the arm had fallen off (and thus the icemaker won't know ...

Icemaker arm won't stay in "up" or "locked" position I am a rental manager and we have several IM34 Frigidaire icemakers that the arm won't stay in the locked position to quit making ice. Is there a ...

...arm was down, the icemaker would make ice, meaning I don't think the problem is with other components. Any ideas? its the ice maker .water or condensation has built up in the ice maker modual and ...

...arm and bottom of the icemaker . Check that spring , to make sure both ends are seated . Ocassionally , the top of the spring (fitting into the bottom of the icemaker ) comes out , and has to be ...

...icemaker. The arm stops the icemaker when your bucket fills and the arm cant move all the way out and then back in. Make sure the ice is building up in the arms way so the arm can sense it. Otherwise ...

...icemaker arm on the L g are diferent dont try to pull up not a shut off arm this has a switch under side of ice maker if u kift up on the arm on this icemaker yo uwill need to buy a new icemaker and ...

...functioning order as well. If you have any further questions message me back Thanks Rick p.s if arm was in up position this would shut the icemaker off and it would not attempt to make ice any ...

...or a power switch located on the icemaker. If you have the model with the wire arm flipping the arm up will cut off the icemaker and flipping it down will turn it back on. I hope this is helpful. ...

...paddle that sits horizontal under the icemaker. If the arm or paddle is broken, the icemaker needs to be replaced. ...