Questions & Answers for: ice dispenser not working

Ice Dispenser Doesn't work... I have model#: GS6NBEXRL00 Whirlpool Side-Side Refrigerator. The ice dispenser does not work. It chirps so it is trying to no avail. The ice in the inside bucket is ...

Ice maker not working My Hotpoint side by side ice maker is not working. Water will dispense when the bottom is pushed, but if you try to dispense crushed or cubed ice nothing comes out. The ice maker

...Ice dispenser not working as happened when lost power for four days last Oct.( ice started up on its own few days later) Ice dispenser not working again after house water turned off for 30 hrs due to ...

...ice/water dispenser. Awhile ago, the ice dispenser started to inconsistently not work. Sometimes, it seems like it was not detecting that I was pushing the cup arm in, which should start the ice ...

Ice dispenser not dropping ice using dispenser knob Model 106.53562202 Kenmore ColdSpot Ice dispenser is not dispersing ice. Ice maker works and water is dispensing. Ice is not dispensing when you ...

...ice dispenser lever, the motor no longer turns on and no ice comes out. However, the water dispenser still works. What replacement part do I need to order? Can I install this part myself or do I need ...

...Ice dispenser doesn't work Dispenser control board If the ice dispenser is not functioning at all the most likely cause is going to be the dispenser control board. The dispenser control board governs ...

...Ice And Water Dispenser Not Working - Repair ... www.repairclinic.com/...---/Refrigerator-ice-and-water-dispenser-not-wo... How It Works: Refrigerators · How It Works: Refrigerator Icemakers · How It ...

...or don't use the ice dispenser. ... I'vetried to decrease the cold in it from the dial and that doesn't help. ... The motor was working and the auger would turn with no ice in bin but the added

...ice to the dispenser. Use a plastic utensil or a straw to clear any ice buildup or debris in the chute. Inspect the dispenser mechanism: Open the dispenser area and check if any part of the mechanism ...