Questions & Answers for: ic tech

Ad

Question about KP-46WT500 46" Rear Projection HDTV-Ready Television

1 Answer

ICS

...convergence IC's & check fuse devices.... Normally done by a skilled Sony tech..... If you need step-by-step instructions, try to find a local tech who will work with you....please

Ad

Question about 43HX70 43" Rear Projection Television

1 Answer

...tech replaced convergence IC's after the convergence went completely wacko....Convergence is perfect now, but the image quality is dull and grainy rather than the crisp, lush picture we had before. ...

Ad

Question about 6427TE 27" TV

2 Answers

...smaller heat sink and the markings on the IC as "TAxxx",TDAxxx",or "STRxxx". it usualy has 8 to 10 pins. if you are not a tech do not attempt this repair without help from a tech or have a tech do

Question about HTS3400/37 System

1 Answer

...IC # for Location 902 Hi, i am a tech and i have this HTS system to be repaired..the top of the IC in the power stage is blown off clean. IC location is 902...what i would like help with is to ...

Question about 53UWX10B 53" Rear Projection Television

1 Answer

send me info on how to fix convergence myself Your lifesaver...dr go to this link they have your ics and they send the instructions with the ICs and will send an email that will sign you up for free ...

Question about KP-46WT510 46" Rear Projection HDTV

1 Answer

...ic when experiencing this problem and refer a webpage to purchase the parts from. Do you think this will solve the blury image and is it something that I could do myself or should I simply take it to ...

Question about AV-65WP74 Rear Projection Television

1 Answer

STK392-110 ICs I have a jvc av-65wp74 and my red is swags down and is not a lined with the other two colors do you think i need two STK392-110 ICs or is it something else... i am good with fixing ...

Question about D52W20 52" Rear Projection HDTV-Ready Television

2 Answers

...IC's replaced for a tech to come out and do that cost about $350-$400 electech this is the conversion IC's that are doing this and it is common for all projection tv's to have to get these IC's ...

Question about Magnavox 27MS343S 27" TV

1 Answer

IC 1001) are present on the board being repaired. Take this info to a TV tech and they will find the correct EEPROM to replace. Your TV will come back to life. If not, give me the numbers of ICs IC001

Question about Magnavox 27MS343S 27" TV

1 Answer

Ic goes bad it has to be replaced.but since you have a flat screen those kind of tv carry a module for every section in the tv so the whole colour module on your tv has to be replaced.if you are not a

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76582 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6255 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...