...STK IC's Do the replacement IC's have SANYO on the face of them? If they do not, this could be your problem. You must use the IC that the manufacturer recommends. All IC's are not alike. Go to MCM ...
ic's stk 390 ----/ I replaced the Convergence IC Chip STK392-110 for my PT-53WX42 Panasonic HD Rear Projection TV but I found burnt resistor(resistor #)R7053,R7002 & R7005.Can someone tell me the part
Question about PT-53TW53 53" Rear Projection HDTV-Ready Television
panasonic pt-53tw53 convergence in i had a convergence problem with my panny. i changed both ics. stk 392-110 to stk 392 180. when i was finishe i connected my dvd player, went to the convergence menu
52 inch projection HD So, what happened is my picture became mixed up with colors and the words warped like an Arch. You can still see a picture and sound. What my husband wants to replace is STK ...
...ic(THE 6 CHANNEL STK),on doing this the set is turning on. Is the audio output ic defective??or the power regulating STK is defective. what shall i check and replace. That code always be for audio ...
Question about PT-53TW53 53" Rear Projection HDTV-Ready Television
...IC Stk now see 3 images, three colors,How do i get it to 1 image. Thanks for any help you have proble with the convergences ICs if the tree colors are at fault then also check your power supply ...
STK-series integrated circuits are amplifier IC's that are most often used in projection TV sets as convergence output amplifiers. When these or other convergence parts fail, the three color images no
Question about PT-56WXF95 56" Rear Projection Television
had convergence problem; replaced 2 stk392; panasonic pt56wxf95a : had convergence problem; replaced 2 stk392; resulted in bowed image; now tv shuts itself off after high beeping sound, no front ...
ic stk 470-040 where do i find it.is that the main IC If you are from delhi then you can search the ic in lajpatrai market(chandni chawk).this is not the main ic as the main ic's are "audio power ...
...Ic's there are two large black IC's mounted on a large metal heatsink. The part numbers are STK-392-110 replace them with the same part number or use STK-392-120 for better and long
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions