Questions & Answers for: Hitachi ic stk

Question about 43FDX20B 43" Rear Projection Television

1 Answer

...IC's stk 392-150 for IK04 and IK05 come in a kit together or are they seperate? I also saw that stk 394-160e is also a replacement? Stk 394-160 are the better IC and they are available in the DP15H ...

Ad

Question about 50FX18B/19K 50" Rear Projection Television

1 Answer

...for the Blue Sub Yoke located near the Sub Yoke Connector should cure the problem. Most of the IC's are STK-392-110's, STK-392-120's, or STK-392-150's. Replace them as a set. Hope this helps, ...

Ad

Question about 53UDX10B 53" Rear Projection Television

1 Answer

...is being pull to the center Hello the convergence IC's have failed and need to be replaced. the part number for the IC's are STK-392-110, have them replaced with STK-392-120 as these will last

Question about 53UDX10B 53" Rear Projection Television

1 Answer

that you have them use STK-392-120 instead as they work better and longer. If you take off the back of the television they are the largest IC's in the unit, they are mounted on large metal heat sinks.

Question about 53FDX01B 53" Rear Projection Television

1 Answer

...STK convergence IC's and a blown resistor (1.5 ohm-RK54) on Hitachi- Model 53FDX01B. Now, I cannot move any of the convergence lines in any direction. Any ideas? Check all the resistors around the 2 ...

Question about 61HDX98B 61" Rear Projection Television

1 Answer

...stk chips. I replaced all diods and now RK 62 keeps burning out.?????? HELP! Alot of techs recommend using the higher wattage ICs to replace the stock ones, which is never a good idea since the ...

Question about 43F300 43" Rear Projection Television

1 Answer

...ic stk----- you can repair this yourself if you can solder you can obtain ic.s from matt electronics or any electronic suppliers locate the convergence ic.s on chasis there will be 2 the number will ...

Question about 51SWX20B 51" Rear Projection Television

1 Answer

Yellow and Blue "Ghosting" Yellow and Blue "Ghosting" Replace Both of the STK ICs ,they are big black ICs and will have PN# on them STK392-110 Check the resistors near STKs and make sure ...

Question about 43UWX10B 43" Rear Projection Television

1 Answer

...image. convergance ic amp? Yes, your Convergence ICs have failed. Replace the STK chips, check fuses and the resistors next to the STK chips. Replace as necessary and re-align via the service

...IC chips and three resistances on my Hitachi TV to fix color alignments. Now the problems is that yellow and blue double image are seen at the bottom of my screen with no much effect on the rest of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hitachi Televison and Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...