philips 55" rear proj. tv...55pp9352 Just replaced ic's and worked for a few seconds and all of a sudden screen went black and there's a chirping noise . TV will power on those ic's are to be replaced
Location of IC's What are ic's and where are they located on the 60 inch Phillips projection tv if you do not know what IC is i do not think you should be in a high voltage TV. IC is integrated ...
RE: Needs the IC # for Location 902 Hi, i am a tech and i have this HTS system to be repaired..the top of the IC in the power stage is blown off clean. IC location is 902...what i would like help with
no sound, no supply B+ No power to audio ic Check for either an open resistor in the B+ line that feeds the audio amp IC or remove the IC and check for B+. If the IC is shorted, the B+ reading will ...
how hard to replace ICs? I have a philips 60pp9202, i know its ic is bad. What would i need and how hard is it to change it? thanks in advance Remove the 4 screws going through the IC's, unsolder the ...
Bocma IC TDA888xx 8V failure what is a Bocma IC TDA888xx 8V failure? usually related to the vertical deflection IC in the DPTV series phillips / magnavox. The Vertical deflection is a BOCMA family IC
Which IC is for red convergence? Recently my red convergence has become completely screwed. I have left/right adjustment, but no up/down. Blue is fine. I'm guessing, through reading through other ...
Question about 60PP9352 60" Rear Projection Television
why there is no datasheet of this ic on internet OM8370PS/N3/1? I have h Hisense 14 inch t.v.. I open it and read the number of ic and tried to search data sheet of this ic.. ic no is OM8370PS/N3/1.. ...
Question about 60PP9352 60" Rear Projection Television
philips dvd ic blast in smps section ic in smps section was blast away without any ic number on it suggest me an ic for it You best buy a new, or when in warranty, bring it back to the store.
Question about 60PP9352 60" Rear Projection Television
PHILIPS CTV 5027/94 USED IC 8893CPBNG7B87 RESTART/STAND BY PROBLEM. TV IS OK AFTER IC PIN 64 OPEN.I HAVE CHAKED RESTART CIRCUIT AND CHANGE IC Hello sir I have the problem in a china kit ic number 8893
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions
