Questions & Answers for: hyundai mass flow sensor problems

hyundai sonata 4 cyclinder touble code P0171 check engine light Sometimes the mass air flow sensor will become clogged with some miniscule particles of dust or whatever else. When you open up your ...

Ad

...hyundai tiburon and everytime i start it the throttle is like stuck and just keeps going until it hits redline. i pulled the codes and it said throttle position sensor so i replaced it along with the ...

Ad

...mass air flow sensor. find the mass air flow sensor on your air intake an un screw it a n disconect the cable an replace. the tps...... if you are looking at the motor (standing in front of front ...

Question about 2005 Tucson

2 Answers

...hyundai getz 2003 model in australia mass air flow sensor in the air induction pipe between the filter and the manifold . sounds lik it is the same problem as my car.i changed my spark plugs and ...

Question about 2005 Tucson

1 Answer

...Mass Air Flow Sensor) If you are not familiar with vehicles I suggest taking it out and replacing it, it should be in your intake box or located close by it. It is typically a round sensor that reads ...

...hyundai xg350 problem starting I replaced EGR valve and cleaned MAF Sensor after codes on handheld scanner showed up. everything cleared and check engine light is gone. Now I it starts first time and ...

Hyundai i10 three was facing some problem when starting car have black smoke and scan the car fault code is p0171 pls give some solution CAR IS RUNNING TO RICH ON GAS. CHECK FUEL PRESSURE FIRST. CHECK

...hyundai santa fe 2002 starts but won't stay running after over refueling .It will stay running if only if I keep my foot on the gas pedal without any problem. Does anyone have any idea what could be ...

...hyundai santa 3.5l code p 0101 refers to mass air flow (MAF) sensor /volume air flow(VAF) sensor --range /performance problem===causes ---intake leak/blockage ---MAF/VAF sensor code p 0201 refers to ...

Hyundai XG30/300 This car has problem with close loop, work one minute and later the scanner show Open Loop Fault, I changed O2 sensor and Temperature sensor. Does the scanner show any other codes? ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...