2.0 liter engine.. 2003 hyundai tiburon.. Also, my 10MM allenhead doesn't seem to bite enough on the bolt.. do you recommend anything to help get it off without stripping them out. Also, last question
...HYUNDAI TUCSON instructions Things You'll Need: Fuel-line disconnect tool Rag New gasket New fuel pump Flat head screwdriver Ratchet and socket The assistance of a friend (only when you are ready to ...
...2. Lift vehicle to remove the Right Front wheel (then remove 4 10mm bolts securing the plastic splash shield & remove it) 3. Loosen the 14mm nut on the alternator belt tensioner pully 4. Loosen ...
engine you should see a spark jump between the two coil terminals indicating healthy cam sensor function and coil condition. Next I would look at injector function, Simply swap over injectors 1 and 2.
...HYUNDAI TIBURON 2.7L V6 1. Remove passenger side headlight via the 3 10mm screws holding it in place and disconnect the turn signal and main harness 2. Remove passenger side tire 3. Remove the splash ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions