Question about Motor 2003 XG350
...Hyundai XG350 as follows: 1. ACCESS ALARM SYSTEM CONTROL MODULE LOCATED BEHIND DRIVER'S SIDE FASCIA PANEL 2. ENSURE MEMORY SWITCH IS IN OFF POSITION. 3. TURN IGNITON TO ON 4. WAIT 5 SECONDS, SET ...
...in off position.The ETS Module performs the INITIALIZATION process and at completion you will hear a click from under dash. Turn the key on for 1 second then start the vehicle. Hope this helps - ...
1. Run the self check by starting with the key in the locked position. 2. Push and hold the trip reset button and turn the key to the unlocked position. 3. Release the button and the gauges will sweep
Usually answered in minutes!
265 Questions
270 Questions
111 Questions
89 Questions
11 Questions