Questions & Answers for: Mitsubishi hydraulics

hi i have an fto mivec 2.0 v6, on a morning when i start it up the hydraulic tappets are very noisy for a minute or so then it goes away, is there a cure for this, as ive been quoted 1200 for new ...

Ad

Question about MT160, MT160D, MT180, MT180D, MT180H, MT180HD, MT210, MT210D, MT250, MT250D, MT300, MT300... (TRM1)

1 Answer

...your e-mail address?s go to http://www.tractorbynet.com/forums/mitsubishi-satoh/101519-welcome-hydraulics-forum.html and you can find what you

Ad

mechanical or hydraulic lifters for my '99 montero sport?? does my 4x4 3.0 liter v6 '99 mitsubishi montero sport have mechanical or hydraulic lifters?? Hydraulic

Question about 2000 Montero Sport

1 Answer

where is the brake light switch on a modelFH100E-D20693 MITSUBISHI ? That truck should utilize a air/hydraulic brake system, check on the master cylinder assembly(s). Usually on outside of vehicle. ...

where is the abs pump in a 2000 galant I need to locate the part so I can get the part number off it Galant and Mirage Fig. HCU mounting-Mirage Fig. HCU mounting-Galant Use a syringe or similar device

I need hydraulic fluid for my 2008 Mitsubishi Spyder convertible top. I would not feel insecure using hydraulic oil for rams and jacks as those items need to be reliable, scoot down to your auto parts

...gear oil into it if needs fill or change/ also check the clutch is fully disengaged. maybe clutch hydraulics have air in the system, this will reduce the travel of the clutch fork and not fully ...

Question about 1992 Pajero

1 Answer

2005 convertible top doesn't retract More than likely the hydraulic pump has run low on fluid due to a hydraulic leak. Have a shop check that first. This system requires a special fluid.

I drive a 2003 Mitsubishi Lancer OZ Rally. So i downshifted my car and my clutch kinda broke. It is very loose now and when I have the car started i can't shift when I depress the clutch pedal. The ...

My Mitsubishi 2008 model colt sometimes crunches when going into reverse and sometimes difficult to get 1st check and bleed air out the hydraulic system or replace the cable if not hydraulic not a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...