Questions & Answers for: husqvarna sewing machine remove covers

Husqvarna classica 100 sewing machine that has sat unused for a few years. Now the stitich lenght will not adjust. It sews super tiny stitches no matter what the setting. I have tried to take the back

...husqvarna viking desinger se sewing machine thread cutter fell apart as I was removing build on thread on it, now I can't put it back on the machine I believe the plastic cover (gray?) toward ...

...Husqvarna Quilt Designer sewing machine. Should it be oiled? Yes, but not excessively or all that often. To lubricate it where it needs it, the main bearings and other internal rotating and sliding ...

...sewing machene for repair I suggest getting a service manual that will show the various screws that have to be removed. In general, pull off the hand wheel, remove the screws from the bottom of the ...

...the front panel from husqvarna viking optima 150e sewing machine. The reverse button is not working. It is now sewing in reverse only If you remove the cover of your machine, you void the

...sewing machine 6000 model 6440? viking sewing machine 6000, model 6440 You can remove the rear cover by taking out two screws on the back cover and a screw at the lower rear corner on the side. With ...

a Viking Husqvarna Classica 100 sewing machine. Assuming I need to remove front cover. How do I do that? Sounds like a bind in the slide block which you get to from the back. It is near the hand wheel

How to remove the covers If it is a computerized machine, the covers are not meant to be removed as the computer components could be easily damaged. ...

...Husqvarna Viking 630 sewing machine. Any advice welcome. I have already removed the back cover. These are very well built machines. I will always suggest having a trained professional repair ...

...Husqvarna Platinum Plus sewing machine? I am working on a Husqvarna Platinum Plus sewing machine and see that the soft touch front button panel has a flat wire lead going right into the back side of ...