Questions & Answers for: husqvarna pull cord

husqvarna pull cord problem pull cord won't turn the engine over, just pulls through freely before retracting. I had this happen after about 15 uses. I just exchanged the unit. The pull start ...

...Husqvarna 232R brushcutter pull cord will not start My 232R brushcutter pull cord will not start engine as it just rotates and there is no resistance. Can't find it on the list of products but engine ...

Husqvarna 445? Set choke to full on. To do this depress throttle all the way down and set choke lever to on. Pull starter rapidly until saw fires . Once it has fired set to start and pull starter cord

Husqvarna 128LD pull cord doesn't engage My Husqvarna 128LD pull cord doesn't engage the drive shaft of engine. I'm wondering if its not something as simple as a spring or something, but, can&

husqvarna Pull cord stuck and blades not turning - cant start mower. My new Husqvarna started and I ran it on a section of my lawn but now the pull cord is stuck - comes out a few inches but then gets

Husqvarna 325L x-series pull cord repair. In the process of another repair, I had to remove the back panel, which holds the pull cord. I'm having trouble getting it back on correctly so the motor ...

husqvarna hedge trimmer hard to pull cord Very hard to pull cord, almost feels sticky check the piston inside the cylinder for extreme wear. If it feels sticky and is hard to pull it sounds like a ...

HUSQVARNA 326E PULL CORD WANT TURN SHAFT PULL CORD WORKS BUT WILL NOT CATCH AND TURN SHAFT, IS TRERE SOMETHING BEHIND THE PULL CORD BROKEN could be the pawl catch on the crank shaft is not working ...

what do i do to put new pull cord in husqvarna Lawn edger cord broke off Remove pull starter off and wind on the new cord then wind up the spring tension so it recoils.