Questions & Answers for: hunter light switch troubleshooting

...Hunter ceiling fan in bedroom, works by remote: fan control (speed/direction), and light (on/off). turned the light on, one of the bulbs goes bad (plink! bright flash & out). Now the lights cannot be ...

...Hunter ceiling fan with four lights at bottom. I believe my remote is ok (changed the battery and I see a red light at top when pressed). The problem is that the fan will not operate or the lights ...

...Hunter Brookline. I had installed a Brookline in my 2nd bedroom at home and it worked fine. When I installed the new Brookline to replace the Builder fan it too hummed. I adjusted and re-tighted but ...

...Hunter fan category, but I couldn't find anything to do with Hampton Bay. I just discovered a remote that goes with my Hampton Bay Redington IV ceiling fan. I have tried all combinations with the dip ...

...in the remote, not 4 like are shown on many troubleshooting websites. Is it a hampton bay fan/light? The fan works with the remote but the light won't. The pull string won't turn off the light ...

...Hunter Fan that is making a buzzing noise and the lights are flashing when I turn it on. I have four others that are fine. Right off hand, I'd say, there's some loose wiring somewhere in the ...

...Hunter celling fan remote control part number 99600 blue light stays on.never powers off and the remote does not work This must be a common problem, since I Googled the part number and it popped up ...

...switch i just turn off, and turn it back on when its time. I recently replaced hunter solenoid, hoping that was help with the issue but didn't work. Thanks in advance for your help, 1) ...

...Hunter 23020 fans and 2 needed switches. I tried several replacement switches with no luck. I was going to open the switch to repair myself as I had done in the past but got lucky and came across ...

Hunter light/fan does not work with wall switch or remote control. Troubleshooting.. need to test power source -then power to unit -check wiring and connections --motor Disconnect power at the source.