Question about 23852 Classic Original Ceiling Fan
...fan hunter original Need to know the schematic when changing or fixing the pull chain which broke on the ceiling fan took the fan apart but forgot how the wires go back into the pull chain box if you ...
Hunter fan will not operate I have a 6 year old Hunter ceiling fan which will suddenly not turn on. The batteries in the remote are good. No circuit breakers off. Hello Did somebody pull one of the ...
Hunter Fan Pull Chain Hard to Operate. I have a two Hunter Stratford II ceiling fans. The pull chain that controls the fan speed starts above the light, goes through the light kit, and comes out ...
Question about 52" Ceiling Fan With Light And Remote Control
hunter 52, fan works but light no longer works with remote or chain pull mcdevito75 here, Don"t the fan lights work off the wall switch, The chain pull should be for fan speed. Check make sure ...
Question about 52" Ceiling Fan With Light And Remote Control
...Hunter fan. The light comes on via pull chain fine, and the control works the 3 speeds on the fan, but the light won't respond. My control won't activate the light on my Hunter fan. The ...
Hunter fan/light w/ remote. Light does not work with either the remote nor pull chain. One similar issue posted w/ solution, but my question is that if the light transponder has failed, will that keep
hunter ceiling fan light pull switch The pull chain light switch has gone bad. I bought a replacement switch but the old one has a longer stem/chain housing to hold the light fixture. Do I have to buy
Question about (25417) Ceiling Fan
...Hunter ceiling fan pulled completely ot of fan by cleaning crew. Can it be repaired? And if so is it worth the cost? Thanks You can get another chain with a hook at the end if there is any of the ...
Question about (25417) Ceiling Fan
...hunter ceilng fan 98480x Your Hunter ceiling fan should have a pull-chain switch. If not, there's a problem with its power supply. Your Hunter ceiling fan should have a pull-chain switch. If not, ...
Question about (25417) Ceiling Fan
fan but nothing else on hunter switch seems to work. 27186 You installed the 27186 to control an existing fan? It's a three speed pull chain fan? Yes and yes,, the fan pull chain must be in high speed
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions