Questions & Answers for: Jeep hub meter

water pump hub removal how do I remove the water pump hub Im not 100% sure about your Comanche but I have (never) seen a water pump that the hub could be removed it is pressed on when the pump is made

1994 front passenger side hub. i removed the 3 hub bolts but the hub and axle will not pull out. I banged on the hub with a hammer as the manual indicates, but it will not move. how do you get the hub

Removing front hub assembly I think I have a noisey, rattlelike sound coming from my hub assembly. It goes away after 3-5 miles of driving. I thought it was the front bearings. If this is true, ...

...Actron, to clear the code after determining which wheel the speed sensor is not being read. Change hub assembly or sensor on the questionable

how do i install a hub assembly for my right front wheel on my 1992 jeep cherokee? jack it up , take the wheel off, take brake assembly off, should be 3 bolts on back side of hub assembly, take those ...

DO I HAVE TO USE A PRESS MACHINE FOR THE HUB OR CAN I USE A HAMMER TO HAMMER THE HUB ONTO THE AXLE? Hub Assembly, I just finished 2.3 hours of taking out the old hub on 2003 hyundai Elentra . I used a

im replacing the front hubs on my 2002 jeep liberty, i need to know the exact socket sizes for the three bolts that hold the hub and the nut on the center axle.. ill appreciated.. thank you The ...

Replace Front Wheel Hub Bearing 2002 Jeep Grand Cherokee 2 wheel drive Replace Front Wheel Hub Bearing 2002Jeep Grand Cherokee 2 wheel drive Removal Raise and support the vehicle. Remove the wheel and

I have a question concerning my 2004 Jeep Grand Cherokee's wheel hubs. I recently bought two front wheel hubs and when I brought it to the mechanic, he said that they don't fit because I didn't get ...

How to repack front wheel bearings on a 98 Jeep Cherokee 4X4 hello, i 4x4 jeep should have hub assembly's not repack able bearings HUB BEARING AND AXLE SHAFT If the axle shaft and hub bearing are ...