...HP 2605, it doesn't work and the display shows 50.7 error. The error appeared after cleaning of the laser(the fuser hadn't touched at all). When I cleaned the laser i tested the printer - it printed ...
...hp laserjet 3005 don't print OK i change the tone and the laser scan unit and still the problme on the printer give blank page (there is no details shown on the paper) i need to fix it please help ...
...hp p1505 laser printer is cery light even after changing tonner and cleaning scaning unit. This could be color miss registry, even though your printer is a monochrome printer there is a sensor which ...
hp laser jet 1160 have a orange light while printing ? it is OK or not please help me in this problem cause this problem is drive me crazy a change already my cartridge assembly of the printer and i ...
Question about LaserJet CM1312 All-In-One Printer
hp cm1312 colour laserjet? Keep getting an error message saying "Black Density Range Error". I found out I need to clean the density sensor but I can't find it. Pages which have black on
Question about LaserJet 4700 Printer
...hp laser colorjet 47OOn whith code error is 54.15 54.15 PRINTER ERRORDescription There is a problem with the Yellow CPR sensor.ActionTurn the printer off, and turn it on again.Clean the color ...
Question about 5500 Color Laser Printer With Internal Print Srver (554000042) Print Server
How do I install a new line sensor on my HP 5500DN laser printer restart the printer , if does not help , try to update the driver if does not , try to do reset "NVRAM "
Question about LaserJet Pro P1606DN Laser Printer with Auto Duplex Printing
HP P1606dn printer toner light is on. I installed new toner but it still is blinking. improperly installed, dirty sensor contacts,
Question about LaserJet Pro P1606DN Laser Printer with Auto Duplex Printing
HP LASER 1300 PCL RED LIGHT FLASHING NOT PRINTING NOT PRINTING AT ALL Could be paper jam, out of paper, bad cartridge, or more serious board problems. first check paper path for piece of paper over a ...
...and check to be torn from the laser sensor has to be a piece of plastic when pressed on the sensor cap ivhizi if the printer should be opened and checked laser You need replace the laser
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions