Hp L1955 LCD monitor Monitor powers on, will blink an actual true display, then goes off and will not give another display unless the monitor cable is unplugged and plugged back in and then it only ...
...HP warranty then you will need to fix or contract out the "switch-mode-power-supply/inverter " refurbishment. Read any of my other responses to other BLACK SCREEN lcd owners. Your LCD no different ...
Question about L1955 19" LCD Monitor
...HP L1955 and L1925 monitors do not show image I have several HP L1955 and L1925 monitors that power on but will not show an image. The last one smelled hot. michael_b173, You will need to do some ...
...inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example ...
...hp.com/hpinfo/globalcitizenship/environment/productdata/Countries/_MultiCountry/disassembly_monito_2006112713913.pdf Second, get yourself good 40w solering Iron and solder. This monitor is made by ...
...inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example ...
...hp 1955 lcd monitor which is not showing picture. It may have bad power supply or inverter circuits due to bad DC filter caps with domed tops. If you are going to DIY and already try the monitor with ...
...HP L1955 monitors (about 5 years old) a problem occurs after a longer time of work: in the upper corners of LCD black areas appear (see http://img291.imageshack.us/i/hpl1955blackleftcorner.jpg/ and ...
is there any layout of components in benq inverter board Inverter boards usually are replaced in full - even in a repair shop. There's little demand for board schematics. Next to this the CCFL ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions
