hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00062808#A5 Set fax quality to standard (instead of fine or photo) and make sure the paper format is compatible with the receiving end (Europe > A4
fax dials out, but after attempts states no answer. If you have an HP here is the link to the error codes. Helped me out, maybe they will help you? http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc
...Disable the ECM (Error Correction Mode). Fax at a different time to see if line quality improves. Try relocating the fax to a differnt phone plug. Replace the phone cord attached to the
...fax command from the product because the connection was interrupted.The remote user has pressed the Stop button while the remote machine was receiving. Under rare conditions, incompatibility between ...
Question about Officejet 4315v All-In-One InkJet Printer
fax on my HP Officejet 4315v, it dials, connects, sends 1 page and cuts off. Then this error code prints. Any suggestions? Thanks 1. issue may be with telephone line conditions, try sending a fax at a
Question about 920 Plain Paper Fax
...fax history report prints up with an Error 344* message. Do you have or are you sending a fax to a party that has a DIGITAL PHONE SERVICE? Connect a phone to the fax machine and call someone in the ...
Question about LaserJet 3050 All-In-One Printer
fax error 344 - HP officejet 4255 all-in-one I have had the same problem fax error 344 and it appears to connect but it does not go thru. Pls help. SQRT fax error is remote machine not responding to ...
...HP J4680 CANNOT SEND OR RECEIVE FAXES Welcome to FixYa! There are 4 reasons for Error 344 to occur when sending or receiving afax. 1. The remote machine failed to respond to a fax command from the ...
...fax to 1 specific number These links should help you. You can also call HP for help. HP Officejet 4620 Turn the power off error HP Printers Ink System Failure or 0x Error Code Displays Officejet 4620 ...
Question about Officejet Pro 8600 Premium e-All-in-One Wireless Inkjet Printer
...fax error codes: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=buu02549 The code 344 indicates noise or static on the line and usually the best way to get around that is to ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions